Submersible Water Pumps for Ponds & Features
Solids-handling pond pumps, waterfall and circulation pumps, statuary kits and utility units from Aquascape, Danner Pondmaster and Little Giant. Shipped across Canada from Markham.
- Authorized Kasco DealerFull factory warranty honoured
- Certified Repair CentreBench service in Markham, Ontario
- 50+ Years ExperienceServicing the GTA since 1974
- Ships Across CanadaMost orders out in 1-2 business days
We Are Proud to Partner With
Shop Pumps by Application
What the pump has to move matters more than the brand on it. Start with the job, then match flow and head height.
Built to pass debris rather than block on it. The right choice for a skimmer-fed pond, a stocked pond with fish waste, or any system where a filter screen would clog between visits.
High-flow pumps for waterfalls, streams and general pond turnover. Size on the head height you need to lift the water, not just on the flow rating.
Smaller pumps for statuary, urns and self-contained features, including kits that arrive with a fountain head ready to run.
Cleanout pumps for pond drainage, plus Little Giant utility, effluent and magnetic-drive pumps and diaphragm pumps for freshwater transfer. The utility units are process and transfer pumps rather than pond pumps - check the fluid compatibility and duty cycle before ordering.
Flow ratings are measured at zero head
A pump rated 4,000 GPH does not deliver 4,000 GPH once it is lifting water eight feet up a waterfall. Tell us the height and the run and we will size on the flow you will actually get.
Size on Head Height, Not on the Number on the Box
Every pump on this page carries a flow rating, and every one of those ratings is measured at zero head - the pump sitting in water with nothing to lift against. The moment you ask it to push water up a waterfall, through pipe and around elbows, the real delivery drops, and on a tall feature it can drop a long way. Sizing on the headline number is the most common reason a new waterfall underwhelms.
The second decision is what the pump has to swallow. A skimmer-fed pond or one with fish produces debris, and a solids-handling pump is built to pass it rather than block on a screen. Put a screened pump in that setting and you will be cleaning it between visits. Conversely, a clean statuary feature or a small urn does not need solids handling and is better served by a compact pump matched to the fitting.
The Little Giant utility and magnetic-drive units in this collection sit apart from the pond range - they are process and transfer pumps, and fluid compatibility and duty cycle matter more than flow curves. If you are pumping anything other than pond water, tell us what, because the wrong seal material fails quickly. Need fittings or a filter to go with it? See pump parts and accessories.
-
Head height is the number that matters
Published flow is measured at zero lift. Every foot of rise and every fitting reduces what actually reaches the top.
-
Solids-handling versus screened
A skimmer-fed or stocked pond needs a pump that passes debris. A screened pump in that setting clogs between visits.
-
Turn the pond over roughly once an hour
A common working target for a stocked pond. Waterfalls are sized on width instead - flow per inch of spillway.
-
Utility pumps are not pond pumps
Little Giant mag-drive and transfer units are process equipment. Check fluid compatibility and duty cycle before ordering.
-
Running cost outlives purchase price
A pump running continuously for years costs far more in hydro than it did to buy. Efficiency is worth paying for.
Fifty Years. Thousands of Ontario Ponds.
Join the landscape contractors, property managers and cottage owners who call us first.
★4.8 out of 5 based on Google reviews›Buying guide
Questions our techs answer every week
Head height, solids handling and duty cycle decide which pump survives the job. Here is what we get asked most.
-
Two numbers: the width of the spillway and the height you are lifting to. Wider spillways need more flow to look full, and every foot of rise cuts what the pump actually delivers.
Published flow ratings are measured at zero head, so a pump rated for 4,000 GPH will deliver considerably less at eight feet. Send us the width and the height and we will size on real delivery.
-
It passes debris rather than screening it out. If your pond is skimmer-fed, stocked with fish, or collects leaves, you want one - a screened pump in that setting clogs between visits.
For a clean statuary feature or a self-contained urn, solids handling is unnecessary and a compact pump is the better fit.
-
A common working target is turning the volume over roughly once an hour on a stocked pond. Lightly stocked ornamental ponds tolerate less; heavily stocked koi ponds want more.
Waterfalls are sized differently - on flow per inch of spillway width rather than on pond volume. If you have both, size for whichever is the larger duty.
-
Generally not the right tool. The Little Giant mag-drive and transfer units here are process pumps built for specific fluids and duty cycles, not continuous pond circulation.
If you are moving anything other than pond water, tell us what it is - seal and housing material compatibility matters and the wrong choice fails quickly.
-
Some do. The statuary and fountain kits arrive with a head ready to run. Most pond and waterfall pumps ship as the pump alone.
Check pump parts and accessories for fittings, or tell us your pipe size and we will include what you need.
-
It depends on whether the feature runs through winter. A pump left in a pond that freezes solid around it will be damaged.
If you are shutting down, the pump comes out, gets cleaned and stored somewhere above freezing. If you are running through, we will advise on what the setup needs. Ask before freeze-up.
The Canadian advantage on every order
Authorized Dealer
Genuine units with full manufacturer warranty, not grey-market imports.
Certified Repair Centre
Factory-trained bench techs rebuilding motors, seals and impellers in Markham. Send it here, not south of the border.
50+ Years in the Field
We have installed and serviced these systems since 1974. Ask us what actually fails at year eight.
Ships Across Canada
Most orders leave the warehouse in 1-2 business days. No cross-border brokerage surprises.
Built for Canadian Winters
Shutdown, storage and freeze-up guidance from a team that works through Ontario winter every year.
A Human Answers
Call and reach someone who has installed the equipment you are about to buy.
Pump Guides & Tips
-
De-Icer vs. Bubbler vs. Aerator: What Keeps Water Open in Winter?
De-icers aim open water at docks and lifts; bubblers (diffused air) suit deep ponds and dugouts; aerators are summer tools. Here's how to choose for a Canadian winter.Read More -
Pond Algaecide in Canada: What Is Legal and What Actually Works
Most pond algaecides sold in the US cannot legally be sold or used in Canada. Here is what the Pest Control Products Act actually requires, and the nutrient-management approach that works instead.Read More -
How to Control Eurasian Milfoil in Canadian Lakes and Ponds
Eurasian watermilfoil spreads from fragments, so control means cutting and removing every piece, limiting light with pond dye, and improving overall lake health with aeration — herbicides are heavily restricted in Canada.Read More
